In short

  • A retrofit HUD plugs into the OBD2 port and shows speed and more on a small reflector. No rebuild.
  • Auto Bild and Computer Bild: Cartrend 10632 won with 1.9 (about €36 to €55). Totmox 2.4, the other three 2.5 to 2.6.
  • Worth it at around €40 if you accept limits: weaker in direct sun, small adhesive pads on curved dashboards.

A factory head-up display is an expensive option. A retrofit one costs about the price of a tank of fuel. Does it work? Auto Bild and Computer Bild tested five. The winner is cheap and easy. It is also not perfect, and I will tell you where.

What it is and how it works

A retrofit HUD is a small box on the dash. It reads data from the OBD2 socket and projects speed and other values onto a reflector film or a fold-up plate. Your eyes stay closer to the road.

You do not need tools. Plug it in, set it up, stick it down.

The test results

  • 1. Cartrend 10632: grade 1.9 (good). Easy to install, bright enough even against light, good symbols. Shows speed, oil and coolant temperature, battery voltage and fuel consumption, plus a driving-time warning and a shift indicator. Fold-up reflector, manual or automatic brightness. Contact area is small. Price in the table €36.32, the text says €55.
  • 2. Totmox OBD-E350: 2.4 (good). €57.19. Easy install, already configured. Quick guide only in English, picture a bit blurry through the film.
  • 3. iKiKin HUD M11 OBD2 and GPS dual: 2.5 (satisfactory). €29.99, listed as unavailable. Good grip from the rubber pads, hard to position, fiddly buttons, slightly blurry.
  • 4. Keenso 5.5 inch F4: 2.5 (satisfactory). €38.05. Simple install, good display. Awkward reflector film placement, the big film can block your view.
  • 5. iKiKin OBD2 and GPS: 2.6 (satisfactory). €36.99. Easy install, very good hold. Awkward film placement and a clumsy rotary switch.

The magazines’ practical tip: built-in projection plates are more usable than film solutions, especially in sun. The spread between first and last is less than one grade, but the details matter.

What to check before you buy

  • Dashboard shape. Curved dashboards give adhesive pads very little to hold on to.
  • Cable route. OBD2 sockets sit low. The cable can get in the way of your knee.
  • Reflector. A plate beats a film in sunlight. A big film can hide the road.
  • Language of the guide. One unit came with an English quick guide only.
  • Return option. Try it for a week.

How to fit it

  • Find the OBD2 socket, usually under the dash on the driver’s side.
  • Test the position on the dash with the engine on before you stick anything.
  • Fix the pad or film. Keep your field of view clear.
  • Route the cable out of the way of the pedals.
  • Set brightness and units, then take a short drive.

Limits and mistakes

  • Expecting a factory-style image. Retrofit images are smaller and fainter.
  • Placing the film where it blocks the view.
  • Fixing it on a strongly curved dashboard and hoping.
  • Buying a unit with only GPS speed if you also want engine data.

Do the math: The winner costs between €36 and €55 depending on the source. The runner-up costs €57.19 and scored lower. So the cheaper one won. A speed read without looking down is the benefit. There is no hard saving in euros here, so decide if that comfort is worth about €40 to you. If it fails, you lose the price of one dinner.

FAQ

Does it work in every car? Most use the OBD2 port, so most modern petrol and diesel cars work. Check the product page for your car.

Is it visible in sunlight? The winner is bright enough against light. In direct sun it is somewhat limited.

Can I leave it plugged in? Follow the maker’s instructions. If unsure, unplug it on long stops.

Ivan’s Take

For about €40 it is a fair gadget. I would take the Cartrend and try it for a week. If you drive a lot at night, you will like it. If your dash is strongly curved, think twice.

Sources: Auto Bild; Auto Zeitung.

Published:

More from this section

The AvtoGear weekly

Once a week: new tests, the best deals and one useful tip for your car. Nothing extra.